Hemlock
Member
I've run into a problem with my Panelview C600 and modbus comms to a Micrologix 1400. I can set up a numerical entry on the screen, and it works fine, since the HMI passes info into an integer (holding) register on the PLC. If I set up a floating point entry, it rounds to input to the nearest integer in the holding register. I can put a float into the touch screen, but I can't get it to the PLC. Is there an easy way around this? I have to stay with Modbus for comms.
Thanks for your help.
Thanks for your help.
Last edited: