s7-1200 Motion control

adam_lhadi

Member
A
Join Date
Feb 2022
Location
algeria
Posts
59
Hi everyone
i trying to learn s7-1200 motion control
can somebody give me some easy to understand and detailed sources
to learn the motion control


kind regards
 
Except pid, library blocks,
I’ve never seen them locked

Look at this link before passing judgment
 
Last edited:
Puddle said:
I have to say I've found the Siemens help files universally terrible. Most of them require you to download a pre-made project that uses a locked FBD to solve the problem, rather than showing you how to actually do it.
Click to expand...


The app examples often come with a pre-made project, yes, to show how it works. The help files almost never do.


They've been getting a lot better about not locking down library blocks. I suspect this is less for user convenience and more for developer convenience; my guess is that whomever makes libraries got sick of making small tweaks or updating, recompiling, and re-locking for every new Portal version....
 
Puddle said:
I have to say I've found the Siemens help files universally terrible. Most of them require you to download a pre-made project that uses a locked FBD to solve the problem, rather than showing you how to actually do it.
Click to expand...

yes bro the siemense manuals in this subject are so hard to understand
 

Similar Topics

A
s7-1200 motion control technology
when controlling a closed loop stepper motor with a PLC,the PLC doesn't know if the target position is reached or not unless the driver it selfe...
Replies
0
Views
990
adam_lhadi
A
A
1200 plc Motion control with BIAS option
Hi everyone i have a delta VFD ,it's control signal is from 0..10V or in Mamps (no -10..10v) my plc is 1251dc/dc/rly with analog output 0..20ma...
Replies
4
Views
2,168
adam_lhadi
A
G
S7-1200 with Stepper Motor (motion control)
Hello specialists! I am facing the problem with controlling the stepper motor. In this project I am using S7-1200 CPU 1214C DC/DC/DC (4 PTO...
Replies
8
Views
3,762
S09
S
K
Siemens S7-1200 with Omron M1 - Modbus RTU
Hi all, Currently having trouble getting a speed reference to write over modbus to an Omron M1... I can successfully write a run command and...
Replies
6
Views
252
KalvMavin
K
J
PLC SIMATIC S7 1200 / KOP/SCL question
HI i would like to know how to get a variable that will store the amount of times a program has been executed. The issue is I have 3 DBs for 1 FB...
Replies
2
Views
81
jimix
J
Back
Top Bottom