Ethernet IP Adress Mapping for Compact Logix

afeefabdussamed

Member
A
Join Date
Sep 2016
Location
Jeddah
Posts
24
Dear all

Can any one guide me for mapping in compact logix in RS Logix 5000 which I will be using MOXA MB Gate 5105 for converting Ethernet IP to Modbus TCP.I am confused in Mapping.
 

Similar Topics

P
PG/PC ethernet connection
Hello guys i'm working with an s7 1200 plc with an ET 200S expansion module. The problem is that i can't find the plc when searching in the...
Replies
1
Views
91
RVaughan
RVaughan
A
reading data from siemens controller (profinet) to ethernet/IP controller
Hello I have a s7-1200 and I would like to read the tags present in this controller with my controllogix controller. The two controllers don't use...
Replies
5
Views
206
bkottaras
B
K
use Simotion D ethernet port as gate to access S7-1500 plc program
Can we use a Simotion D455 ethernet port x127 as a gate, to access S7-1500 plc Tia Portal program ? In the Simatic manager, we used Netpro to do...
Replies
2
Views
106
mk42
M
S
Powerflex 755 - Hardwired & Ethernet in Parallel
So I have a sort of unique situation where I'm wanting to run a PF755 from the IO and over ethernet. Of course, this comes with it's own set of...
Replies
9
Views
322
sparkie
S
afm
Ethernet Dongles for PC-to-PLC connection?
Hi all, My ethernet port on my laptop recently broke and I was hoping to just use a usb-c dongle in the mean time to go live on my PLC until I...
Replies
14
Views
486
JesperMP
JesperMP
Back
Top Bottom