candwmachine Member C Join Date Jul 2006 Location tennessee Posts 1 Jul 10, 2006 #1 I have rslogics 500 and in the list of processors it has micrologics 1200 series a and b. Will this software also do series c? thanks
I have rslogics 500 and in the list of processors it has micrologics 1200 series a and b. Will this software also do series c? thanks
bernie_carlton Lifetime Supporting Member + Moderator Join Date Apr 2002 Location Yakima, Washington Posts 6,413 Jul 10, 2006 #2 If it doesn't show it it probably won't do it. Check your software level with your local AB distributor an upgrade as necessary.
If it doesn't show it it probably won't do it. Check your software level with your local AB distributor an upgrade as necessary.
geniusintraining Lifetime Supporting Member + Moderator Join Date Jun 2005 Location SC Posts 8,303 Jul 10, 2006 #3 it should look like this as Bernie said..
Marc Member Join Date Jun 2004 Location Nashua, NH Posts 430 Jul 11, 2006 #4 FYI RSLogix 500 is at rev 7.10 at the moment I believe. Marc
Jimmie_Ohio Member Join Date Aug 2005 Location Cleveland Posts 492 Jul 11, 2006 #5 I had this exact same problem with my old version of RS Logix. The first time a series C MicroLogix showed up at the panel shop, I had to upgrade... All I needed to do was get a one-year online support contract through Rockwell for about $500 USD.
I had this exact same problem with my old version of RS Logix. The first time a series C MicroLogix showed up at the panel shop, I had to upgrade... All I needed to do was get a one-year online support contract through Rockwell for about $500 USD.