ohaldi
Member
Dear Sir,
I bought a ACS355-03E-03A and have a problem to get the max. speed with the motor.
Motor Data : 2830 min, 50Hz, 1.1Kw (see picture)
ACS355 parameters: 9906=2.5A, 9907=50Hz, 9908=2830 rpm, 9909 1.1Kw
If I set the parameter 1105 and 2008 to 50Hz the motor do run to the max. speed. I think only about 50%!
I have to setup the 1105 and 2008 to about 120-130 Hz to get the max. speed. The display then show me a rpm from about 7400!
Do I make a wrong setup with the motor ?
Many thanks for your help
Otto Haldi
I bought a ACS355-03E-03A and have a problem to get the max. speed with the motor.
Motor Data : 2830 min, 50Hz, 1.1Kw (see picture)
ACS355 parameters: 9906=2.5A, 9907=50Hz, 9908=2830 rpm, 9909 1.1Kw
If I set the parameter 1105 and 2008 to 50Hz the motor do run to the max. speed. I think only about 50%!
I have to setup the 1105 and 2008 to about 120-130 Hz to get the max. speed. The display then show me a rpm from about 7400!
Do I make a wrong setup with the motor ?
Many thanks for your help
Otto Haldi