lostcontrol Lifetime Supporting Member L Join Date May 2009 Location NeverSayNever Posts 1,070 Apr 21, 2020 #16 worked no problem for me, with no changes...
BobB Lifetime Supporting Member Join Date Jun 2002 Location Sydney Posts 4,554 Apr 21, 2020 #17 Do not know what your issue is but it works in the simulator for me unchanged.
Icehouse Member OP I Join Date Apr 2020 Location Melbourne Posts 7 Apr 21, 2020 #18 Well I finally got it to work. Couple uninstalls / re-installs and some reboots for good measure. Thanks for assistance. Cheers
Well I finally got it to work. Couple uninstalls / re-installs and some reboots for good measure. Thanks for assistance. Cheers
EICS Member Join Date Dec 2008 Location Melbourne, Australia Posts 323 Apr 21, 2020 #19 i am not up on omron PLC's, but it looks like its not running the subroutine do you need to set the task "NewProgram1" to run.... as others have said it looks to not be scanning the program file
i am not up on omron PLC's, but it looks like its not running the subroutine do you need to set the task "NewProgram1" to run.... as others have said it looks to not be scanning the program file