lostcontrol
Lifetime Supporting Member
worked no problem for me, with no changes...
Omron coil not powering
- Thread starter Icehouse
- Start date
EICS
Member
i am not up on omron PLC's, but it looks like its not running the subroutine
do you need to set the task "NewProgram1" to run.... as others have said it looks to not be scanning the program file
do you need to set the task "NewProgram1" to run.... as others have said it looks to not be scanning the program file
Similar Topics
Hi there ,i'm using a CQM01 PLC for my project. I was just testing the input and output of my PLC with a very basic program with only one contact...
I have a problem with my omron zen10c1ar-a-v1 i rote my program and i duplicated coil and timer (error) and now my coil will not activate what...
I've come across a system running omeron cx-programmer version 9.42. Am I going to need to find a legacy version of the software to edit and...
Has anyone done SMS messaging from an Omron CJ2J-CPU31 PLC? If so could you help please. Omron here in Oz have not had any experience doing this...
I have an old plc in the system I have, moxa nport was used to communicate with scada, I want to replace the plc with cj2m cpu33 and eliminate...