PWS3261/HMI/HItech

msalman

Member
M
Join Date
Mar 2018
Location
ibd
Posts
4
help required to download program PWS3261 HMI and connect with RS232C port of PLC,
cheksum error in start(firmware problem?),
without removing checksum error ,making single button and compiling program then only application download working but no display on hmi on run,
download firmware and application not working shows timeout error
dip switches, 5 and 6 off only other all on
please help
 

Similar Topics

R
HiTech PWS3261 HMI
I am not familiar with Hitech HMI. I had to replace a defective screen with a new one. Screen was not readable on the old one and it displayed...
Replies
2
Views
3,334
andybutcher
A
V
Shihlin HMI
hi there, I'm a beginner pls help when transferring pc to hmi there's an error message on shihlin hmi written com1 station 1: communication...
Replies
1
Views
71
DarrylR
D
H
Mitsubishi FX3G PLC with Beijer HMI E615
Hello, I have a Mitsubishi FX3G 14M PLC and a E615 HMI from Mitsubishi/Beijer. I'm using GXWorks 2 to do the programming and I have no problem...
Replies
4
Views
149
NicoSz
N
B
Advantech TCP-1250H HMI upload/Download
Good people of PLCs.net, I am currently working with an HMI that is advantech 1250H, that communicates with a 1769 Compact logix and Currently...
Replies
2
Views
78
bdauliya
B
T
Is it bad to have multiple identical inputs on an HMI?
Hello all, I know its not good practice to have duplicate destructive bits when writing plc code, but I'm wondering about writing to the same tag...
Replies
2
Views
121
TheRooster
T
Back
Top Bottom