PLC_Shaggy
Member
I am in the process of migrating a SLC to a CompactLogix. To aid this conversion I am using a AENTR to make the SLC a remote rack to the CL while doing my development. The problem I am running into is there are several vision cameras. For the SLC to work I need to Inhibit the cameras in the CL. I would like to be able to do this in the logic by monitoring the status of the AENTR. If the adapter is active I take control of the cameras. Once the adapter is in fault (not being used), I inhibit the communications with the cameras with the CL.
I have tried using the SSV command. But for Modules, I only get a Mode selection. This toggles the 'Major Fault On Controller' setting.
For now I will just manually toggle the Inhibit Module setting.
Thanks for any help.
I have tried using the SSV command. But for Modules, I only get a Mode selection. This toggles the 'Major Fault On Controller' setting.
For now I will just manually toggle the Inhibit Module setting.
Thanks for any help.