MarkNightingale
Lifetime Supporting Member + Moderator
aec,
Have a look at this .acd file.
I have quickly knocked it up the way I would probably write the code if I was in a rush.
There are better ways of doing but I think you will understand what is happening. I have tested it and everything works.
The 6 HMI buttons are which fan you want to start, in what order so if you press fan3 fan4 fan1 fan2 fan5 fan6, then they will start in that order.
The delay is the same for each fan, but if you want it to be different, then that is possible, but then you are getting to the point where you really to get someone in to help, that's not something I am prepared to do in my spare time.
I also have a rough HMI program written in factorytalk studio V6.
Mark
Have a look at this .acd file.
I have quickly knocked it up the way I would probably write the code if I was in a rush.
There are better ways of doing but I think you will understand what is happening. I have tested it and everything works.
The 6 HMI buttons are which fan you want to start, in what order so if you press fan3 fan4 fan1 fan2 fan5 fan6, then they will start in that order.
The delay is the same for each fan, but if you want it to be different, then that is possible, but then you are getting to the point where you really to get someone in to help, that's not something I am prepared to do in my spare time.
I also have a rough HMI program written in factorytalk studio V6.
Mark