Swingmanstan
Member
Old Allen Bradley guy here: I used to have a SCL or SCP and then a PID tuner block to use.
Here in the FANUC ladder world I have not been able to use a function block that does PID loop. I was told I had to buy a different PMC package to get SUB 460.
I would like to hear any suggestions for a simplified PID, controlling a 0-10 V modulating valve from 1 4-20mA pressure input.
Thanks
Stan
Here in the FANUC ladder world I have not been able to use a function block that does PID loop. I was told I had to buy a different PMC package to get SUB 460.
I would like to hear any suggestions for a simplified PID, controlling a 0-10 V modulating valve from 1 4-20mA pressure input.
Thanks
Stan