pratap_awate
Member
Hello,
I have Control Logix 1756-L63 processor with 1756-CNB module.
On controlnet network there is Flex frequency counter 1794-IP4 module through adapter 1794-ACN15.
Can any one guideline me how to configure this module using RSLogix5000 Ver 16.00.
I have tried 'MSG' instruction to Block transfer Read and Write. In Message Configuration, Communication tab, i have checked to ControlNet, also given path for 1794-IP4.
But it didn't communicate with IP4 module, show Extended Error Code 16#0000_0114 means 'Wrong Module'.
I really need help on this.
I have Control Logix 1756-L63 processor with 1756-CNB module.
On controlnet network there is Flex frequency counter 1794-IP4 module through adapter 1794-ACN15.
Can any one guideline me how to configure this module using RSLogix5000 Ver 16.00.
I have tried 'MSG' instruction to Block transfer Read and Write. In Message Configuration, Communication tab, i have checked to ControlNet, also given path for 1794-IP4.
But it didn't communicate with IP4 module, show Extended Error Code 16#0000_0114 means 'Wrong Module'.
I really need help on this.
