TIA PORTAL can't be linked to S7-314C- 2DP, via MPI

mourad69

Member
M
Join Date
Nov 2010
Location
casablanca
Posts
7
Hi everyone,

We have a portal TIA V13, the USB cable adapter 6ES7 972-0CB20-0XA0, but after plagin the usb cable, there is only the PPI protocol through Com4 in On-Line access, so the MPI protocol doesn't appear, the first problem is that the driver is only supported by windows XP, i know that the portal TIA has it's driver integrated, I have already activated the port MPI in the configuration device level.

Many thanks for any answer!
 

Similar Topics

M
TIA PORTAL can't be linked to S7-314C- 2DP, via MPI
Hi everyone, We have a portal TIA V13, the USB cable adapter 6ES7 972-0CB20-0XA0, but after plagin the usb cable, there is only the PPI protocol...
Replies
0
Views
2,033
mourad69
M
Itshouldwork
A way to detect online, hardware and software changes of Siemens TIA Portal V17
Hi PLC people, think about this scenario: The PLC is somehow connected to the same network with the facilities` network. Then someone connects to...
Replies
2
Views
71
mk42
M
P
SOFTWARE TIA PORTAL V14 - PLC SIEMENS
Hello, good morning, I have been having two problems with the Tia Portal software. The first is that I have installed it on my computer and...
Replies
5
Views
178
tdoa
T
S
TIA-portal - Adding connection to HMI in a different project
Hello all! So I have one project with a S7-1214 and a MTP1500 "Project1" and one project with another S7-1214 "Project2". Both of these PLC:s need...
Replies
6
Views
106
swedeleaner
S
T
TIA Portal 15.1. and fanuc SR-6iA Communication
Hello, i am using profibus as communication between plc and fanuc arm. I can easily send inputs from plc to arm, but i can't monitor any outputs...
Replies
0
Views
46
Tinx12
T
Back
Top Bottom