Hello there
I a using a keyence HMI VT3-W4G and my question is how to set the backlight color in the HMI. I was reviewing the PLC code and found that value K1 is given for red color and K8 is given for orange/green blinking but couldn't understand how these numbers are assigned for these numbers.
I a using a keyence HMI VT3-W4G and my question is how to set the backlight color in the HMI. I was reviewing the PLC code and found that value K1 is given for red color and K8 is given for orange/green blinking but couldn't understand how these numbers are assigned for these numbers.