chopin Member C Join Date May 2012 Location Milton Keynes Posts 210 Sep 23, 2020 #1 Hello guys, Can someone advice what software do I need to open an old Omron CPU41 PLC project?
gtsuport Member G Join Date Feb 2005 Location Grand Rapids, MI Posts 1,322 Sep 23, 2020 #2 Can you supply the complete model number of the plc. CPU41 really does not tell us enough. Most likely you will need CX-One software, CX-Programmer. gtsuport
Can you supply the complete model number of the plc. CPU41 really does not tell us enough. Most likely you will need CX-One software, CX-Programmer. gtsuport
parky Member P Join Date Oct 2004 Location Midlands Posts 5,748 Sep 23, 2020 #3 I think you can use CX1 but the older Syswin will work and I know it works on win7 but never tried it on Win10
I think you can use CX1 but the older Syswin will work and I know it works on win7 but never tried it on Win10
chopin Member OP C Join Date May 2012 Location Milton Keynes Posts 210 Sep 23, 2020 #4 I only have a photo
gtsuport Member G Join Date Feb 2005 Location Grand Rapids, MI Posts 1,322 Sep 23, 2020 #5 That is a CQM1 series. CX-One will work. Syswin will work. You can plug a serial cable into the CIF01 unit on the left. See cable pinout attached.
That is a CQM1 series. CX-One will work. Syswin will work. You can plug a serial cable into the CIF01 unit on the left. See cable pinout attached.
chopin Member OP C Join Date May 2012 Location Milton Keynes Posts 210 Sep 23, 2020 #6 Great! Thanks a lot
Hossam Azzaz Member Join Date Oct 2019 Location Cairo, Egypt Posts 9 Sep 23, 2020 #7 You can use CX-One with win 7 and a serial connection or a USB 2 serial cable that will work.