AlfredoQuintero
Lifetime Supporting Member
OK I have the Win V3 Demo running and I cam connected to it with my programming running.
When I got on line it says my EtherNet/IP Scanner is not running.
Or am I completely off?
I saw your screenshots. It seems there is an issue with the only adapter that you have configured. Can you get the status for the adapter? If you connect to the RaspberryPi with a VNC client, you can install and launch Wireshark (need to do so in super user mode) and you can get the traces to see why the adapter is not communicating, in case the status indicated by Codesys is not helpful.