How do I simulate a PLC program from Unity to the Red Lion Crimson HMI?
When I put Unity in simulation mode the IP is set to 127.0.0.1, but I can't set Red Lion to this.
Am I missing an intermediate software to accomplish this? With a physical PLC I just point Red Lion to PLC IP.
I'm using both Unity and Red Lion on a VM.
Thanks
When I put Unity in simulation mode the IP is set to 127.0.0.1, but I can't set Red Lion to this.
Am I missing an intermediate software to accomplish this? With a physical PLC I just point Red Lion to PLC IP.
I'm using both Unity and Red Lion on a VM.
Thanks