nickromano07
Member
Hello all! Can anyone give me a basic run down on how to set up a simple speed control ladder program with RSLOGIX 500? I have exp. with this program and I have been using discrete commands for simple controls. I have a basic idea, I'm not starting from the bottom.
Here is what I have: Micrologix 1200 with 4channel combo modual ( 4-20ma/0-10v input&output) I want to control speed with an HMI touchscreen ( maple systems 5104T silver series plus) I have all the digital commands programmed already. I want to create a slide control with the HMI to control the speed of my drive ( Eaton SVT9000 ) Does anyone have the patients to help me construct this? As I said before, I am NOT totally new to this and ANY help would be really great! Thank you very much!
Here is what I have: Micrologix 1200 with 4channel combo modual ( 4-20ma/0-10v input&output) I want to control speed with an HMI touchscreen ( maple systems 5104T silver series plus) I have all the digital commands programmed already. I want to create a slide control with the HMI to control the speed of my drive ( Eaton SVT9000 ) Does anyone have the patients to help me construct this? As I said before, I am NOT totally new to this and ANY help would be really great! Thank you very much!