Baker in Virginia
Member
Good Evening ,
I purchased a Banner IVU Plus BCR , and took notice there is a CD in the box. Not too familer with Barcode Scanners. My question is , is there Banner software that you can use to interface with and use to setup the IVU Plus BCR ? I am familer with Cognex and Insight Software , and you are able to see the results and also a wider picture.
Also , I am setting this IVU Plus up to interface , via Ethernet/IP , with a CompactLogix PLC. After I did this , I took notice in Controller Tags I have......
Banner_IVU_Plus:I
Banner_IVU_Plus:O
Banner_IVU_Plus:C
I am having a difficult time determining what bit , INT , etc. for triggering , Pass / Fail , etc. I haven't seen any documentation descibing these tags. It is probably something I am overlooking .
If so , I'm sorry.
Thanks so much in advance.
I purchased a Banner IVU Plus BCR , and took notice there is a CD in the box. Not too familer with Barcode Scanners. My question is , is there Banner software that you can use to interface with and use to setup the IVU Plus BCR ? I am familer with Cognex and Insight Software , and you are able to see the results and also a wider picture.
Also , I am setting this IVU Plus up to interface , via Ethernet/IP , with a CompactLogix PLC. After I did this , I took notice in Controller Tags I have......
Banner_IVU_Plus:I
Banner_IVU_Plus:O
Banner_IVU_Plus:C
I am having a difficult time determining what bit , INT , etc. for triggering , Pass / Fail , etc. I haven't seen any documentation descibing these tags. It is probably something I am overlooking .
If so , I'm sorry.
Thanks so much in advance.