dear sir's,
i have OMRON CJ1M CPU with SCU41-V1 CARD for RS-422/485 communication with omron inverter of model V7 via PMCR(260) Instruction. now i want to replace the V7 inverter with V1000. i have made all the port settings and parameter settings for V1000. but i am not much familiar with cx-protocall. i wnat to edit the send and receive sequence for V1000. i have the sequece as mentioned below for V7 inverter. please can some one help me on this regard.
send message for v7 inverter was written as mentioned below.
send msg:
SD(0)_1 <a>+[100118000102]+(R(2),2)+<c>
SD(1)_1 <a>+[0300230001]+<C>
RECEIVE MSG:
RV(17)_1 <A>[0302]+(W((1),2)+<C>
i could not understand the data [100118000102] which was not clearly mentioned in any of the manual.
thanks and best regards,
anushamoorthy.s
i have OMRON CJ1M CPU with SCU41-V1 CARD for RS-422/485 communication with omron inverter of model V7 via PMCR(260) Instruction. now i want to replace the V7 inverter with V1000. i have made all the port settings and parameter settings for V1000. but i am not much familiar with cx-protocall. i wnat to edit the send and receive sequence for V1000. i have the sequece as mentioned below for V7 inverter. please can some one help me on this regard.
send message for v7 inverter was written as mentioned below.
send msg:
SD(0)_1 <a>+[100118000102]+(R(2),2)+<c>
SD(1)_1 <a>+[0300230001]+<C>
RECEIVE MSG:
RV(17)_1 <A>[0302]+(W((1),2)+<C>
i could not understand the data [100118000102] which was not clearly mentioned in any of the manual.
thanks and best regards,
anushamoorthy.s