Guest
Guest
G
we currently have about 250 90/30 PLC's. We used LM90 across the board, never had any problems.
We had a new (so-called) programmer talk us into Versa Pro, So the change was made. Our machine builders we told to use versa pro.
everything was fine for a while but a new problem arose, one of our machine buliders upgraded their Versa Pro to 2.0 not a big problem but we have some older PLC with outdated firmware.
We have another machine builder that has decided to use CIMPLICITY Machine Edition, which I don't have.
so I have machines with LM90, Versa Pro 1.5, Versa Pro 2.04 ,and CIMPLICITY Machine Edition
updating firmware is out as GE wants around $100 a PLC. All of GE prices are too high.
I want to know if theres a program out there that will convert versa pro and CIMPLICITY Machine Edition back into LM90.
We do very little complete logic but we tweak alot.
I do know once its uploaded to PLC as versa Pro its had to go back but we feel that getting back to LM90 would be the best all solution as GE seams to change software whenever they want to.
Thanks,
Bill
We had a new (so-called) programmer talk us into Versa Pro, So the change was made. Our machine builders we told to use versa pro.
everything was fine for a while but a new problem arose, one of our machine buliders upgraded their Versa Pro to 2.0 not a big problem but we have some older PLC with outdated firmware.
We have another machine builder that has decided to use CIMPLICITY Machine Edition, which I don't have.
so I have machines with LM90, Versa Pro 1.5, Versa Pro 2.04 ,and CIMPLICITY Machine Edition
updating firmware is out as GE wants around $100 a PLC. All of GE prices are too high.
I want to know if theres a program out there that will convert versa pro and CIMPLICITY Machine Edition back into LM90.
We do very little complete logic but we tweak alot.
I do know once its uploaded to PLC as versa Pro its had to go back but we feel that getting back to LM90 would be the best all solution as GE seams to change software whenever they want to.
Thanks,
Bill