comphyper Member C Join Date Feb 2018 Location Pangasinan Posts 1 Feb 21, 2018 #1 Hi, Do you have any guide on how to convert Alspa C80-35 logic program to RSLogix 5000? Thank you.
gclshortt Member Join Date Dec 2014 Location Ontario Posts 3,217 Feb 23, 2018 #2 http://www.plctalk.net/qanda/showthread.php?t=15411 The above thread may help you out with the logic program. http://www.plctalk.net/qanda/showthread.php?t=102790 This thread will talk about IO in RSLogix 5000. Remember to check to see if the scan is Synchronous and Non-Synchronous. There is nothing that will transfer the program directly. You will have to rewrite the code. Hope this helps you out. Regards,
http://www.plctalk.net/qanda/showthread.php?t=15411 The above thread may help you out with the logic program. http://www.plctalk.net/qanda/showthread.php?t=102790 This thread will talk about IO in RSLogix 5000. Remember to check to see if the scan is Synchronous and Non-Synchronous. There is nothing that will transfer the program directly. You will have to rewrite the code. Hope this helps you out. Regards,