How to configure "Siemens PP17-II Push Button Panel" on Ethernet network.

pjadha

Member
P
Join Date
Feb 2014
Location
pune
Posts
22
Hello Siemens experts please help me to Configure PP17 panel on Ethernet network in S7-300 CPU315 2PN/DP.

I have "S7-300 CPU315 2PN/DP" and "Siemens PP17-II Push button panel". I want to configure it on Ethernet network. I tried to do it but while doing it asks for MAC Address. And I don't know how to get MAC Address and configure it. Please someone tell me Procedure how to configure it......
 

Similar Topics

N
Configure Siemens S7-300 as I-Device
Good Morning!! I am trying to configure a siemens s7-300 cpu as an I-Device, to read the data on a GE RX3I PLC. Do you need to do some ladder...
Replies
10
Views
3,377
AlfredoQuintero
A
N
Siemens configure fanuc Profinet cp1616
Hi Guys I have some issues with profinet configuration Siemens step 7 v5.5 Fanuc robot profinet card cp1616 I have 8 byte safety 16 byte...
Replies
1
Views
2,086
sigmadelta
S
C
How to configure and programming to write bool values to siemens plc s7.300 via modbu
Hi Sir, I am using S7-300/400. I am usually using FC 03 and FC04 to transfer (R/W) bool values by moving them DBs. However i want to R/W bool...
Replies
1
Views
2,087
Henny
H
A
how to configure siemens s7-300 DI/DO
model;simatic S7-300,315-2AG10-OABO DIO SIM323 D16/DO16*DC24V,323-1BL00-0AA0 Problems, i have configured the CPU and digital hardware as stated...
Replies
4
Views
3,106
avremail
A
R
FTView Alarm Event Banner - How to configure alarm subscribe exception
Hi folks. I have a system that I'm working on that needs 2 alarms banners with different event subscription: - One banner for a specific area...
Replies
6
Views
211
Cheeseface
C
Back
Top Bottom