Hi everyone.
Part of a project I'm working on includes a Panelview connected to a Modicon 984A processor. I originally asked for the Enhanced Panelview because we have a similar machine with a SLC 5/04 and the enhanced Panelview model. I bought the 1400e software and hoped to copy the program from the similar machine and change the tags to correspond to Modicon addresses. Sometime into the project I was told that Allen Bradley no longer offers the enhanced model Panelview with Modbus interface so I ended up with the standard Panelview (with Modbus interface).
Of course the standard model uses Panelbuilder 32 software. I believe that the application program from a standard Panelview can be converted and loaded into the enhanced model but not vice versa.
Does anyone have any suggestions on the easiest way to convert the application program from the enhanced Panelview into the Standard Panelview? Thanks.
Part of a project I'm working on includes a Panelview connected to a Modicon 984A processor. I originally asked for the Enhanced Panelview because we have a similar machine with a SLC 5/04 and the enhanced Panelview model. I bought the 1400e software and hoped to copy the program from the similar machine and change the tags to correspond to Modicon addresses. Sometime into the project I was told that Allen Bradley no longer offers the enhanced model Panelview with Modbus interface so I ended up with the standard Panelview (with Modbus interface).
Of course the standard model uses Panelbuilder 32 software. I believe that the application program from a standard Panelview can be converted and loaded into the enhanced model but not vice versa.
Does anyone have any suggestions on the easiest way to convert the application program from the enhanced Panelview into the Standard Panelview? Thanks.