Ken Roach
Lifetime Supporting Member + Moderator
Welcome to the Forum !
This is a five-year-old thread and should not be resurrected because it does not contain modern information.
PanelBuilder32 cannot open *.MER file... it supports only the obsolete PanelView Standard terminals and their *.PBA and *.PVA files.
To work with any PanelView Plus terminal, you need FactoryTalk View Studio ME software.
This is basic A-B distributor level stuff; get in touch with your local distributor and discuss what you already have and what you need to work on your automation systems. Westburne is the A-B distributor in British Columbia (province-wide, as far as I know).
If you have a specific question about your application, determine (if you can) what firmware revision the *.MER was created with, and please create a new thread to ask those questions in.
This is a five-year-old thread and should not be resurrected because it does not contain modern information.
PanelBuilder32 cannot open *.MER file... it supports only the obsolete PanelView Standard terminals and their *.PBA and *.PVA files.
To work with any PanelView Plus terminal, you need FactoryTalk View Studio ME software.
This is basic A-B distributor level stuff; get in touch with your local distributor and discuss what you already have and what you need to work on your automation systems. Westburne is the A-B distributor in British Columbia (province-wide, as far as I know).
If you have a specific question about your application, determine (if you can) what firmware revision the *.MER was created with, and please create a new thread to ask those questions in.