rQx
Lifetime Supporting Member
Hi!
I am a bit confused regarding a safety relay from Allen Bradley. We have a 230VAC model. I can't find what voltage there is supposed to be on the safety input? Acording to the wiring diagram in the manual it seems like it is the same as the voltage input, 230VAC (or 24VDC if you have a 24VDC model). But when I meassure I get 34VDC, this also seems a little bit odd to me. Anyone has any inputs on this?
The two channels are from S11 and S21.
Here is the manual link: http://literature.rockwellautomation.com/idc/groups/literature/documents/in/440r-in060_-mu-p.pdf
/Tim
I am a bit confused regarding a safety relay from Allen Bradley. We have a 230VAC model. I can't find what voltage there is supposed to be on the safety input? Acording to the wiring diagram in the manual it seems like it is the same as the voltage input, 230VAC (or 24VDC if you have a 24VDC model). But when I meassure I get 34VDC, this also seems a little bit odd to me. Anyone has any inputs on this?
The two channels are from S11 and S21.
Here is the manual link: http://literature.rockwellautomation.com/idc/groups/literature/documents/in/440r-in060_-mu-p.pdf
/Tim