Colt Hero
Member
What's the easiest way to quickly determine which physical I/O points are in-use for a project?
I see tags with I/O names that are "connected" to physical "RIO" points through SCL (scaling) blocks.
I also see tags referenced to physical "I" and "O" points.
But if I just go into the I/O Configuration and start looking at physical I/O, I don't see any connection there. It seems like you cannot tell which physical I/O are actually "in-use" unless you rummage through the Tag List or look for I/O routines with SCL blocks in them.
Is that the only way to do it?
I just want to be able to go into the I/O Configuration and pick the next available/open Analog In, or Digital Out ... without having to think about it.
I see tags with I/O names that are "connected" to physical "RIO" points through SCL (scaling) blocks.
I also see tags referenced to physical "I" and "O" points.
But if I just go into the I/O Configuration and start looking at physical I/O, I don't see any connection there. It seems like you cannot tell which physical I/O are actually "in-use" unless you rummage through the Tag List or look for I/O routines with SCL blocks in them.
Is that the only way to do it?
I just want to be able to go into the I/O Configuration and pick the next available/open Analog In, or Digital Out ... without having to think about it.