Hi,
I have a PowerFlex 70 that I have digital inputs one and two configured for Start and Stop-CF respectively.
When I have bring the Start input high and the stop low, there is a stop asserted from the digital inputs on the VFD. When I bring the start input low and the stop input high the stop asserted goes away and the drive is shown as stopped but ready.
I am already controlling the VFD through a 20-Comm-E so I know it works.
Why is my start input causing a stop to be asserted at the VFD?
I have a PowerFlex 70 that I have digital inputs one and two configured for Start and Stop-CF respectively.
When I have bring the Start input high and the stop low, there is a stop asserted from the digital inputs on the VFD. When I bring the start input low and the stop input high the stop asserted goes away and the drive is shown as stopped but ready.
I am already controlling the VFD through a 20-Comm-E so I know it works.
Why is my start input causing a stop to be asserted at the VFD?