Hello I need to do a design with a PLC for logic of my machine,
I will have :
-Not too huge software
-intuitive
-fastfoward
-easy simulation
I never tryed s7-1200. I already tried in 3 years ago the S7-300(I found it complicated, and TIA portal quite heavy), some person told me that the S7-1200 is easier. Never heard about the mitsubishi L series... I also think about Phoenix ILC 191...
Do you have some advice or good/bad experience? thank you
I will have :
- 1 station of 20-25 IO and two other remote of 20-25 I/O.
- Communication ethernet ip with a motion controller(6 axis)(Who are controlled by one of these controlers.
- Canopen com or RS485 for the receiver(radio remote control)
- HMI
- Huge program to implement
- I will need sd card for flashing and/or datalog
- I will need a web server
- More compact possible
-Not too huge software
-intuitive
-fastfoward
-easy simulation
I never tryed s7-1200. I already tried in 3 years ago the S7-300(I found it complicated, and TIA portal quite heavy), some person told me that the S7-1200 is easier. Never heard about the mitsubishi L series... I also think about Phoenix ILC 191...
Do you have some advice or good/bad experience? thank you