B&R PC Scada Communication

gknn

Member
G
Join Date
Mar 2015
Location
Mew York
Posts
1
I have a B&R 2003 system. RS232 port is occupied. Can I use CAN Port to communicate the PLC for PC Scada Application.
:confused:
 

Similar Topics

A
WinCC SCADA to the S7-PLC cross-subnet communication?
Is it possible to connect a PC with running WinCC Advanced or Unified to a siemens PLC such as S7-1200 across different subnets? The computers can...
Replies
0
Views
86
aamirawan91
A
M
PLC communication over 4G router to Remote SCADA
Hello Experts, I would like to know how can a PLC with modbus tcp/ip protocol can communicate with remote scada with modbus tcp/ip over gsm 4g...
Replies
5
Views
1,023
mad4x4
mad4x4
J
DeltaV DCS SCADA communication with Allen Bradley ControlLogix
I have a DeltaV DCS system we are putting together and will pull data from a Allen Bradley Control Logix PLC. I am not sure how that communication...
Replies
0
Views
1,128
jakeparsons03
J
D
S7-1500 communication with SCADA system
I'm working with a client who are in the process of installing a smart waste solution in a new building. This solution will be using s7-1500 PLC...
Replies
10
Views
4,720
DigiWaste
D
J
ignition scada, communication flow
I can't seem to find a clear answer on this. Say you have a plc and an hmi with ignition to control the plc(and of course all other things you do...
Replies
12
Views
5,154
rdrast
rdrast
Back
Top Bottom