Edmhydraulics
Member
Hey all, here's a simple question, I am writing to a range of MW addresses %MW103 to %MW194, I want to clear all of these to a value of 0 with a bit from the HMI.
I have the following:
%MW4:=91
%MW103[%MW4]:=0
But this doesn't seem to be working, any thought. I know it's simple, but I come from the structured text world and getting my syntax correct can be difficult.
I have the following:
%MW4:=91
%MW103[%MW4]:=0
But this doesn't seem to be working, any thought. I know it's simple, but I come from the structured text world and getting my syntax correct can be difficult.