Does anyone know of a way to find out which memory locations correspond to a certain I/O address in Modicon's RLL?
I'm mating an Automation Direct EZ-Text 220P panel to a PC-E984-258 Modicon CPU setup. There's no problem setting up the WORD addresses for text entry. However, for the life of me, I can't figure out what bits to use for the buttons/leds/lamps. If I set them for WORDs 400200, 400210, 400220 (in the EZ-Text software), what on earth would I use for the BOOL input/output variables in the actual Modicon ladder?
I've done this with Automation Direct's DL-240 CPUs and it's easy to cross-reference the VMem WORD address with the internal contact relays, but I'm having no luck finding one with Modicon. Hopefully someone here is familiar with this setup?
Currently I've got the Panel configured to use 400100 for storage of 1 timer value, 400101 for the 2nd, etc... They're all called from within the ladder, directly inputting the 4xxxxx register location into the timer and work great.
But I'm stuck trying to figure out how to get the buttons/lamps/leds to work.
I'm mating an Automation Direct EZ-Text 220P panel to a PC-E984-258 Modicon CPU setup. There's no problem setting up the WORD addresses for text entry. However, for the life of me, I can't figure out what bits to use for the buttons/leds/lamps. If I set them for WORDs 400200, 400210, 400220 (in the EZ-Text software), what on earth would I use for the BOOL input/output variables in the actual Modicon ladder?
I've done this with Automation Direct's DL-240 CPUs and it's easy to cross-reference the VMem WORD address with the internal contact relays, but I'm having no luck finding one with Modicon. Hopefully someone here is familiar with this setup?
Currently I've got the Panel configured to use 400100 for storage of 1 timer value, 400101 for the 2nd, etc... They're all called from within the ladder, directly inputting the 4xxxxx register location into the timer and work great.
But I'm stuck trying to figure out how to get the buttons/lamps/leds to work.