Omron NJ101-9000 and Powerflex 525

yarock

Member
Y
Join Date
May 2020
Location
Quebec
Posts
1
Hi,
I want to control an AB Powerflex 525 drive over Ethernet/IP by using a Omron NJ101-9000.
It seems that I would need an EDS file to communicate but I can't find one.
Would someone have some tips about how to establish the communication?
Thank you!
 

Similar Topics

W
Omron NJ101 to Omron NJ101 communication
I'm new to the Omron world and struggling a bit with transferring data from one NJ controller to another. The first thing I want to do is a...
Replies
1
Views
996
Whatsup
W
J
Omron NJ101 PLC and Cmore EA7 HMI
Has any one connected the Cmore panel to an Omron NJ PLC if so how? I have been reading up on the FINS communication protocol, Seems a bit fuzzy...
Replies
7
Views
2,536
gtsuport
G
T
Omron NJ101-1000 - First Program Problem
I am just getting started with a Omron NJ and am trying to get a basic ladder to work. I am sure I am missing a step or something. When a input...
Replies
1
Views
1,494
gclshortt
gclshortt
BobB
SMS messaging from an Omron CJ2M-CPU31
Has anyone done SMS messaging from an Omron CJ2J-CPU31 PLC? If so could you help please. Omron here in Oz have not had any experience doing this...
Replies
3
Views
85
BobB
BobB
I
omron cj2m with scada comunication
I have an old plc in the system I have, moxa nport was used to communicate with scada, I want to replace the plc with cj2m cpu33 and eliminate...
Replies
1
Views
58
IO_Rack
IO_Rack
Back
Top Bottom