im a first timer on cx prog and unfortunately im finding it a lil unfriendly..unlike siemens which addresses for field devices (I for input and Q for output) and internal coils and relays (M) are very transparent, cx programmer does not define this..iv read sample programs written in cx but the more i read, the more i get confuse because i have observed inconsistenciesam i correct that from 0.00 onwards it is the address for input, 100.00 onwards is for the output and 10.00 onwards are for internal relays and coils?i cant confirm this because i do not have a physical plc for now..im only using an online simulator to check my program..on the simulator,nevertheless, my program works as i wanted it to be..but before writing the program to the plc, i wanted to make sure that the addresses are proper..
any words will be of great help..
tnx
theripley
any words will be of great help..
tnx
theripley