Christina Rhodan
Member
Hi ! I am totally new to this PLC stuff and we do a technical practice week @ school and everyone has to choose something from a few projects. So please forgive me that simple question : I am sitting in front of a Omron CPM1A 40 CDT1-D its wired to my CX Programmer 3.0 on a PC. I do have also an Oriental Brushless DC Motor
(AXH Series 30 W) with a Driver card. My goal is just to start this motor, turn it on and off, slow it down and so on. The programming is not the problem I think but the the wiring of the PLC and the Driver card drives me mad. I tried everything nothing seems to work.
I do have a few manuals but I don't get it.
Don't get me wrong I want to make the project on my own but and I am not trying to cheat here to get a better grade. It's just I need an initial start ;-)
Hope someone can help me
Christina
(AXH Series 30 W) with a Driver card. My goal is just to start this motor, turn it on and off, slow it down and so on. The programming is not the problem I think but the the wiring of the PLC and the Driver card drives me mad. I tried everything nothing seems to work.
I do have a few manuals but I don't get it.
Don't get me wrong I want to make the project on my own but and I am not trying to cheat here to get a better grade. It's just I need an initial start ;-)
Hope someone can help me
Christina