Hi everyone,
I have been asked by a client to provide some support on configuring an Allen Bradley Micro 820 PLC and Panelview HMI.
The requirement is fairly simplistic, and is to display the 4-20mA input signals onto the HMI (no actual control functionality required).
I have experience in working with RSLogix programming software however I have never used Components Workbench software.
Could someone give me some guidance/ examples on how to use Components Workbench to receive, scale and transmit the analogue signals to the HMI.
Your assistance is greatly appreciated.
I have been asked by a client to provide some support on configuring an Allen Bradley Micro 820 PLC and Panelview HMI.
The requirement is fairly simplistic, and is to display the 4-20mA input signals onto the HMI (no actual control functionality required).
I have experience in working with RSLogix programming software however I have never used Components Workbench software.
Could someone give me some guidance/ examples on how to use Components Workbench to receive, scale and transmit the analogue signals to the HMI.
Your assistance is greatly appreciated.