Hello all, I have to get into one of the above to remap an output. I am having a nightmare finding the right programming cable. Anybody know where I can get one? I keep buying different ones only to find that they are like the allen Bradley type circular connectors and just not big enough to mate with the programming port on the front of the FP1-C14. AFP8550FP1 is the official Panasonic part but still the equivalent leads still seem to have a connector that is too small. Any help would be appreciated! Thank you
HELP!!!! Matushita FP1-C14 Programming Cable
- Thread starter ste1070
- Start date
Similar Topics
Hello everyone. Could someone please assist me?
I am using Citect version 7.2 service pack 5 and Windows 7.
I have created a project...
Hello, I'm not sure if anyone can help me. I made a big mistake by pulling out the battery to swap it with the machine turned off, and as a...
I've adjusted the IP of the Panelview Plus as well as the DNS servers; the screen does not show up in the search when I go to the transfer utility...
Hi Everyone,
I own a GE Versamax controller that I purchased for a class at Long Beach City College a couple of years ago. I lost the use of my...
I was wondering if anyone could help i am trying to use a SLC 500 with a 5/05 processor to set up an incremental encoder to a HSCE2 card? The card...