Hello all, I have to get into one of the above to remap an output. I am having a nightmare finding the right programming cable. Anybody know where I can get one? I keep buying different ones only to find that they are like the allen Bradley type circular connectors and just not big enough to mate with the programming port on the front of the FP1-C14. AFP8550FP1 is the official Panasonic part but still the equivalent leads still seem to have a connector that is too small. Any help would be appreciated! Thank you
HELP!!!! Matushita FP1-C14 Programming Cable
- Thread starter ste1070
- Start date
Similar Topics
So i've been at this for a long while, i have Citect Scada 2018, i have full access to everything but i can't seem to find any option or...
Hi all, hope you are having a great day,
I am in need of your help to create a AOI or program that does this kind of job:
I have a IO Link...
please help me . I have to make this ladder diagram and I can’t figure it out :(
Hi Everyone,
i was hoping for a little help with this module. i have data that needs to be read from a different plc through the Modbus plus...
Hello,
I am trying to replicate a piece of logic on the PLC5 onto an SEL RTAC. I am using ladder on SEL and FBD. I am having issue on the ladder...