danielmx
Member
Good Day guys I'm new to this forum,
I have an XG-X2200 system and 2 cameras CA-HX200C.
For example When I try to use a characterize of Vision Tool >> Area.
Can I select but when I try to record an image in Registered Image I failed.
I storage the image on the respective carpet for a camera but don't work.
https://imgur.com/a/TnQcg
Comments or improvement proposals are more than welcome.
I have an XG-X2200 system and 2 cameras CA-HX200C.
For example When I try to use a characterize of Vision Tool >> Area.
Can I select but when I try to record an image in Registered Image I failed.
I storage the image on the respective carpet for a camera but don't work.
https://imgur.com/a/TnQcg
Comments or improvement proposals are more than welcome.