PanelView Component USB cable

godfrey

Member
godfrey
Join Date
Apr 2002
Location
Charlotte, NC
Posts
412
The USB cable 2711C-CBL-UU02 is used to program this series of panels. I don't have one and can not find out what type of USB end is on the panel side. Common USB ends are mini A, mini B, micro A micro B, type A and type B. The AB literature is not specific on the end type. Does anyone have one and can you tell me the type of end? Thanks.
 

Similar Topics

G
Panelview Component - Does not see applications on USB stick
Hi Everyone, I've got a 2711C-K3M Panelview component. I've used several of these in the past and hated every minute of it but this one is...
Replies
5
Views
2,349
gbeaker
G
A
A/B CCW PanelView Component Design Station
Does anyone have access to a programmer's manual for this? Specifically, I am looking for instructions for the advanced toolbox objects such as...
Replies
0
Views
1,038
Art333
A
T
2711C-T4T Panelview Component upload
I need to get an upload from a 2711C-T4T. I found an old thread http://www.plctalk.net/qanda/showthread.php?p=734222#post734222 on here that...
Replies
1
Views
1,960
technolog
T
C
PanelView Component Decimal Display
I am using a PanelView C1000 as the display and a MicroLogix 1400 as the controller. How do I use a floating point address (i.e F8:0) from the...
Replies
3
Views
1,429
chrisreisinger79
C
C
panelview component c600 not communicating on reboot
I have a working collection of applications for the PVC C600. the setup is one pvc600 connected to a DH485 network with two micrologix 1200's...
Replies
3
Views
1,566
gclshortt
gclshortt
Back
Top Bottom