Eugenious
Member
Hello,Can anyone help me with this program I'm trying to develop?
I'm using a AutomationDirect CLICK plc.
Sequence will start and stop using a remote start/stop station.
I have 4 conveyor and crusher motors and here is how I want the sequence to go:
Starting sequence:
motor 1 starts
motor 2 starts after motor 1 run confirm and 30 sec. Delay
motor 3 starts after motor 2 run confirm and 30 sec. Delay
motor 4 starts after motor 3 run confirm and 30 sec. Delay
* I need to monitor motors in such way that if any of them doesn't start within programed time then they allshould stop or not start.
Also got an e-stop that needs to imediatly shut down whole sequence in case it gets pressed.
Stopping sequence:
motor 4 stops
motor 3 stops after motor 4 stop confirm and 30 sec. Delay
motor 2 stops after motor 3 stop confirm and 30 sec. Delay
motor 1 stops after motor 2 stop confirm and 30 sec. Delay
Thanks for your help.
Eugene.
I'm using a AutomationDirect CLICK plc.
Sequence will start and stop using a remote start/stop station.
I have 4 conveyor and crusher motors and here is how I want the sequence to go:
Starting sequence:
motor 1 starts
motor 2 starts after motor 1 run confirm and 30 sec. Delay
motor 3 starts after motor 2 run confirm and 30 sec. Delay
motor 4 starts after motor 3 run confirm and 30 sec. Delay
* I need to monitor motors in such way that if any of them doesn't start within programed time then they allshould stop or not start.
Also got an e-stop that needs to imediatly shut down whole sequence in case it gets pressed.
Stopping sequence:
motor 4 stops
motor 3 stops after motor 4 stop confirm and 30 sec. Delay
motor 2 stops after motor 3 stop confirm and 30 sec. Delay
motor 1 stops after motor 2 stop confirm and 30 sec. Delay
Thanks for your help.
Eugene.