Ken Roach
Lifetime Supporting Member + Moderator
This thread is a continuation under a new title of an application thread regarding the interface between a Garmin GPS and a MicroLogix 1400 controller: Previous Thread "MicroLogix 1400".
We have a working routine that will take the incoming GPS data (called an NMEA 0183 protocol Sentence) and break apart the comma-separated numbers into individual Strings in the MicroLogix 1400 controller.
What we need to add next is a routine to actually Read the incoming data using ASCII port instructions, then a routine to convert text to values.
We have a working routine that will take the incoming GPS data (called an NMEA 0183 protocol Sentence) and break apart the comma-separated numbers into individual Strings in the MicroLogix 1400 controller.
What we need to add next is a routine to actually Read the incoming data using ASCII port instructions, then a routine to convert text to values.