PLC Begineer HELP needed

[email protected]

Member
E
Join Date
Jan 2020
Location
Magdeburg
Posts
1
I am working with Phoenix Contact PLC and using Software PC Worx for programming.
Can someone please tell me
1) what is the difference between profibus dp and profibus pa
2) how to identify profibus pa and dp devices
3) how is data read from a field device to the software.


I know the basics of PLC but i have never worked on a profibus/profinet environmet. and i dont know how to start.
 

Similar Topics

S
Siemens PLC Main Disconnect Trip
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
6
Views
122
drforsythe
D
N
Conveyor PLC
the conveyor can stop because of a safety sensor or safety switch. And also it can stop because of an object jam detector sensor. If the conveyor...
Replies
5
Views
177
geniusintraining
geniusintraining
T
PLC Delta DVP 12SE and HMI Kinco GL043E not propperly connecting
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Replies
0
Views
36
Tecnolaundry
T
Mas01
S7-TIA Portal: How can I make a project if I've only got the code loaded on the PLC?
Hi All, Someone at work has put a PLC system on my desk, that's just been taken off an idle production line. He said "It's an S7 PLC. We don't...
Replies
10
Views
232
bkottaras
B
A
ATS using a PLC
I have a project to automate four generator sets. The system will monitor and store the load demand of the factory. Once there's Power outage, the...
Replies
0
Views
62
Alibaba07
A
Back
Top Bottom