I am trying to read data from a PLC-5 in my ControlLogix program over Ethernet. I keep getting a connection failure. I have configured many messages but for some reason this one has me stumped. I searched the forum many times now and can't find a thread that deals with my issue.
First off I am able to go online with the PLC5/20C by means of Ethernet. The PLC5/20C is connected to a panel view plus 1000 by means of controlnet and the ENBT card in connected to the panel view plus, thus allowing me to get into the PLC5/20C.
I attached a screen shot of RSLinxs, Comms Path on the PLC 5/20C, and my message configuration in contrologix. I have tried the DH+ also with no luck.
First off I am able to go online with the PLC5/20C by means of Ethernet. The PLC5/20C is connected to a panel view plus 1000 by means of controlnet and the ENBT card in connected to the panel view plus, thus allowing me to get into the PLC5/20C.
I attached a screen shot of RSLinxs, Comms Path on the PLC 5/20C, and my message configuration in contrologix. I have tried the DH+ also with no luck.