Greetings,
I need some help solving a minor fault issue.
From the Controllers Properties - Minor Fault Tab:
(Type 04) Program Fault
(Code 04) Arithmetic overflow. Result of an arithmetic instruction out of range.
Location: Rung 1
I've attempted to attach a jpg image of Rung 1
Local:1:I.DATA[3] is Type=DINT
It is written to by a module that converts 2 4-20ma signals to DEVICENET. Bits 0-15 is channel 0 (one the 4-20ma transmitters) and bits 16-31 is channel 1 (the 2nd 4-20ma transmitter).
MVM instruction block is passing only the 1st 16bits to give the reading of channel 0 or transmitter#1.
I am tring to figure out what is causing the Fault.
Anyhelp would be greatly appreciated. If I have not provided enough info, please let me know.
Thanks
I need some help solving a minor fault issue.
From the Controllers Properties - Minor Fault Tab:
(Type 04) Program Fault
(Code 04) Arithmetic overflow. Result of an arithmetic instruction out of range.
Location: Rung 1
I've attempted to attach a jpg image of Rung 1
Local:1:I.DATA[3] is Type=DINT
It is written to by a module that converts 2 4-20ma signals to DEVICENET. Bits 0-15 is channel 0 (one the 4-20ma transmitters) and bits 16-31 is channel 1 (the 2nd 4-20ma transmitter).
MVM instruction block is passing only the 1st 16bits to give the reading of channel 0 or transmitter#1.
I am tring to figure out what is causing the Fault.
Anyhelp would be greatly appreciated. If I have not provided enough info, please let me know.
Thanks