kiwisoundguy
Member
Hi there,
Are there any experts or people with knowledge in the EMC and LVD testing here?
if so, read on..
I have a display which is powered by 230v. It has an internal PCB mounted PSU to drop that down to 15vdc. There is a multi stage filter inline with an unfused IEC input connector.
For LVD testing, does my device need a power switch for incoming mains?
Must the incoming be fused?
Does the secondary (15vdc) need to be fused if the internal PSU (AC-DC) provides over/under voltage and over current and temperature protection?
EMC questions:
What is the general EMC testing standard? BS 61000?
Thanks in advance!
Are there any experts or people with knowledge in the EMC and LVD testing here?
if so, read on..
I have a display which is powered by 230v. It has an internal PCB mounted PSU to drop that down to 15vdc. There is a multi stage filter inline with an unfused IEC input connector.
For LVD testing, does my device need a power switch for incoming mains?
Must the incoming be fused?
Does the secondary (15vdc) need to be fused if the internal PSU (AC-DC) provides over/under voltage and over current and temperature protection?
EMC questions:
What is the general EMC testing standard? BS 61000?
Thanks in advance!