Mickey
Lifetime Supporting Member
I think it is the same thing. See the PDF I posted.
SLC 5/04 Programming Cable 8 pins - DB9
- Thread starter WallyPrestone
- Start date
geniusintraining
Lifetime Supporting Member + Moderator
Mickey said:
You are correct
geniusintraining
Lifetime Supporting Member + Moderator
Hello
You can not make that cable, you will need to buy it
You can not make that cable, you will need to buy it
Similar Topics
Hello guys. Got Slc5/04 with 9pin d shell port in it. Have cheked some manuals and this port is an RS 232. I want to ask if I could use a generic...
i have a slc 5/02, but i'm not sure wich software to use (i have both rslogix 500 and 5000) but the main problem is that i dont have the cable, i...
Does anyone know the correct AB cable I need to connect a laptop serial port to an SLC 5/04 processor programming port, specifically the DIN...
I am just finishing up my project, which was my first experience with PLCs. I thank everyone that has helped me work through the RIO and analog...
Hello,
I've taken on yet another basket case old machine running an 7 slot SLC 5/03 PLC....
I have run into a situation where I see the same 4...
