AB Relay Output Issue

Saw no faults on the Device Net scanner or PLC fault tables.


MOD/NET and I/O Status both solid green when logically on and logically off.


Rockwell support thinks it could be a corrupt file, so export to LK5 and bring back, also rebuild chassis.



System goes back online later today so my trouble shooting could be done for awhile.
 

Similar Topics

B
AB 5069-OBV8S Safety Output Relay
Hi, I am using AB 5069-L306ERS2 CPU. My system should achieve SIL-2. I have safety door switches connected to AB 5069-IB8S module, and I want to...
Replies
1
Views
110
ASF
A
E
Replace relay with sinking output (non)
I’ve got some devices that are triggered by shorting pins to common. There is 24 volts on each pin and right now I am using a relay output card...
Replies
8
Views
2,568
I_Automation
I_Automation
J
Difference between PLC output options: Sourcing/Relay
I have a Automation Direct Click Plus that you can buy option CPU slot modules for input/outputs. The slot modules have the options of sinking...
Replies
9
Views
2,831
I_Automation
I_Automation
F
Troubleshooting Relay Output Nuisance On
Troubleshooting a Eaton Easy719-AC-RCX. Have three digital inputs and one relay output. PLC input power 120VAC. Each digital input has a 120VAC...
Replies
6
Views
1,995
dvcochran
D
D
datasheet claims relay output is "Form A - Normally Closed"
Hi all, A client is asking if I can move a motion sensor from an existing alarm dialer to a PLC discrete input. Looking up the datasheet, it...
Replies
5
Views
2,295
defcon.klaxon
D
Back
Top Bottom