douglasfcx
Member
I have a Siemens Micromaster 440 (6SE6440-2UC25-5CA1) with encoder module (6SE6400-0EN00-0AA0) and Profibus module (6SE6400-1PB00-0AA0).
I'm unable do access multiple parameters via BOP, even parameters with access level 1, like P0004. I'm unable to access parameter P0970 too. So I'm unable to reset the driver to factory settings. The driver is in profibus network. I tryed to disable the driver and change P0003 to 3 and 4, but the parameters still locked.
There is a way to unlocked the parameters of Micromaster 440 by BOP?
I'm unable do access multiple parameters via BOP, even parameters with access level 1, like P0004. I'm unable to access parameter P0970 too. So I'm unable to reset the driver to factory settings. The driver is in profibus network. I tryed to disable the driver and change P0003 to 3 and 4, but the parameters still locked.
There is a way to unlocked the parameters of Micromaster 440 by BOP?