Dear Sirs,
I am using a FX-232-AW with a FX-24-MR, it communicates through a home-made cable with the pc. Monitoring the plc is possible and I can read the program that is in it. I was wondering if the FX-232-AW has a build in rs232-422 converter or do I still have to use the SC-09 cable. Does someone know where I can find some documentation about the FX-232-AW?
But I have another problem. Trying to clear the memory, I have unplugged the battery. Now I can't get anything into the memory. The cpu-e led is flashing. Reading the plc's diagnostics using FXGP-win it gives an 6402 error, that would be a memory capacity setting error. Using other capacity settings then 2K didn't solve anything, it says capacity exceeded. When I monitored the following devices:
D8002 = 2
D8102 = 0 (should be the same as D8002, or am I wrong?)
D8003 = 16
D8064 = 6402
Does someone know what happend or what I did wrong?
I would be very thankfull if you could help me.
Greeting Gunther
I am using a FX-232-AW with a FX-24-MR, it communicates through a home-made cable with the pc. Monitoring the plc is possible and I can read the program that is in it. I was wondering if the FX-232-AW has a build in rs232-422 converter or do I still have to use the SC-09 cable. Does someone know where I can find some documentation about the FX-232-AW?
But I have another problem. Trying to clear the memory, I have unplugged the battery. Now I can't get anything into the memory. The cpu-e led is flashing. Reading the plc's diagnostics using FXGP-win it gives an 6402 error, that would be a memory capacity setting error. Using other capacity settings then 2K didn't solve anything, it says capacity exceeded. When I monitored the following devices:
D8002 = 2
D8102 = 0 (should be the same as D8002, or am I wrong?)
D8003 = 16
D8064 = 6402
Does someone know what happend or what I did wrong?
I would be very thankfull if you could help me.
Greeting Gunther